![]() Now, compile the blades on the clipper head and screw them tightly. Remember to tick the inner part of the blade with a marker.Ĭlean the debris off the blade with a dry rag after sharpening. Repeat this three to four times to give it a lustrous shine.īesides, you should see a similar result once you rub off the highlighted part of the blade. Scrub on for about 30 seconds and start over with a new piece of sandpaper. Scrub the interior of the blades over the sandpaper. Spray the sandpaper with some oil or water for fluid motion. When you think you've done a good job, switch over to the 8000 grit side of the whetstone and repeat the process. You can use a fast motion or make long scenic strides over the stone. ![]() Press the blade flat on the whetstone, then glide it back and forth over the length of the stone. Lubricate the stone with a dash of water or clipper oil over the area you want to work. Place the whetstone on a flat surface with the 3000 grit side facing up. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |